[Overview][Constants][Types][Procedures and functions][Index] |
|
Maximum number of arguments to a program. |
|
|
Flag for various *at calls to indicate current working directory |
|
|
Unlink at: specify rmdir behaviour |
|
|
Number of bits in a word. |
|
|
Request fork behaviour for clone call |
|
|
System error: Argument list too long |
|
|
System error: Permission denied |
|
|
System error: Address already in use |
|
|
System error: Cannot assign requested address |
|
|
System error: Advertise error |
|
|
System error: Address family not supported by protocol |
|
|
System error: Try again |
|
|
System error: Operation already in progress |
|
|
System error: Invalid exchange |
|
|
System error: Bad file number |
|
|
System error: File descriptor in bad state |
|
|
System error: Not a data message |
|
|
System error: Invalid request descriptor |
|
|
System error: Invalid request code |
|
|
System error: Invalid slot |
|
|
System error: Bad font file format |
|
|
System error: Device or resource busy |
|
|
Operation canceled |
|
|
System error: No child processes |
|
|
System error: Channel number out of range |
|
|
System error: Communication error on send |
|
|
System error: Software caused connection abort |
|
|
System error: Connection refused |
|
|
System error: Connection reset by peer |
|
|
System error: Resource deadlock would occur |
|
|
System error: File locking deadlock error |
|
|
System error: Destination address required |
|
|
System error: Math argument out of domain of func |
|
|
System error: RFS specific error |
|
|
System error: Quota exceeded |
|
|
System error: File exists |
|
|
System error: Bad address |
|
|
System error: File too large |
|
|
System error: Host is down |
|
|
System error: No route to host |
|
|
System error: Identifier removed |
|
|
System error: Illegal byte sequence |
|
|
System error: Operation now in progress |
|
|
System error: Interrupted system call |
|
|
System error: Invalid argument |
|
|
System error: I/O error |
|
|
System error: Transport endpoint is already connected |
|
|
System error: Is a directory |
|
|
System error: Is a named type file |
|
|
Key has expired (Linux kernel module) |
|
|
Key was rejected by service (Linux kernel module) |
|
|
Key has been revoked (Linux kernel module) |
|
|
System error: Level 2 halted |
|
|
System error: Level 2 not synchronized |
|
|
System error: Level 3 halted |
|
|
System error: Level 3 reset |
|
|
System error: Can not access a needed shared library |
|
|
System error: Accessing a corrupted shared library |
|
|
System error: Cannot exec a shared library directly |
|
|
System error: Attempting to link in too many shared libraries |
|
|
System error: .lib section in a.out corrupted |
|
|
System error: Link number out of range |
|
|
System error: Too many symbolic links encountered |
|
|
Wrong medium type |
|
|
System error: Too many open files |
|
|
System error: Too many links |
|
|
System error: Message too long |
|
|
System error: Multihop attempted |
|
|
System error: File name too long |
|
|
System error: No XENIX semaphores available |
|
|
System error: Network is down |
|
|
System error: Network dropped connection because of reset |
|
|
System error: Network is unreachable |
|
|
System error: File table overflow |
|
|
System error: No anode |
|
|
System error: No buffer space available |
|
|
System error: No CSI structure available |
|
|
System error: No data available |
|
|
System error: No such device |
|
|
System error: No such file or directory |
|
|
System error: Exec format error |
|
|
Required key not available (Linux kernel module) |
|
|
System error: No record locks available |
|
|
System error: Link has been severed |
|
|
No medium present |
|
|
System error: Out of memory |
|
|
System error: No message of desired type |
|
|
System error: Machine is not on the network |
|
|
System error: Package not installed |
|
|
System error: Protocol not available |
|
|
System error: No space left on device |
|
|
System error: Out of streams resources |
|
|
System error: Device not a stream |
|
|
System error: Function not implemented |
|
|
System error: Block device required |
|
|
System error: Transport endpoint is not connected |
|
|
System error: Not a directory |
|
|
System error: Directory not empty |
|
|
System error: Not a XENIX named type file |
|
|
State not recoverable (mutexes) |
|
|
System error: Socket operation on non-socket |
|
|
System error: Not a typewriter |
|
|
System error: Name not unique on network |
|
|
System error: No such device or address |
|
|
System error: Operation not supported on transport endpoint |
|
|
System error: Value too large for defined data type |
|
|
Owner died (mutexes) |
|
|
System error: Operation not permitted. |
|
|
System error: Protocol family not supported |
|
|
System error: Broken pipe |
|
|
System error: Protocol error |
|
|
System error: Protocol not supported |
|
|
System error: Protocol wrong type for socket |
|
|
System error: Math result not representable |
|
|
System error: Remote address changed |
|
|
System error: Object is remote |
|
|
System error: Remote I/O error |
|
|
System error: Interrupted system call should be restarted |
|
|
Operation not possible due to RF-Kill (wireless) |
|
|
System error: Read-only file system |
|
|
System error: Cannot send after transport endpoint shutdown |
|
|
System error: Socket type not supported |
|
|
System error: Illegal seek |
|
|
System error: No such process |
|
|
System error: Srmount error |
|
|
System error: Stale NFS file handle |
|
|
System error: Streams pipe error |
|
|
System error: Timer expired |
|
|
System error: Connection timed out |
|
|
System error: Too many references: cannot splice |
|
|
System error: Text (code segment) file busy |
|
|
System error: Structure needs cleaning |
|
|
System error: Protocol driver not attached |
|
|
System error: Too many users |
|
|
System error: Operation would block |
|
|
System error: Cross-device link |
|
|
System error: Exchange full |
|
|
Maximum elements in a TFDSet array. |
|
|
Value signalling floating point divide by zero in case of SIGFPE signal |
|
|
Value signalling floating point invalid operation in case of SIGFPE signal |
|
|
Value signalling floating point overflow in case of SIGFPE signal |
|
|
Value signalling floating point inexact result in case of SIGFPE signal |
|
|
Value signalling floating point subscript out of range in case of SIGFPE signal |
|
|
Value signalling floating point underflow in case of SIGFPE signal |
|
|
Value signalling integer divide in case of SIGFPE signal |
|
|
Value signalling integer overflow in case of SIGFPE signal |
|
|
fpFCntl command: Get close-on-exec flag |
|
|
fpFCntl command: Get file descriptor flags |
|
|
fpFCntl command: Get lock |
|
|
fpFCntl command: get owner of file descriptor events |
|
|
fpAccess call test: file exists. |
|
|
fpFCntl command: Set close-on-exec flag |
|
|
fpFCntl command: Set file descriptor flags |
|
|
fpFCntl command: Set lock |
|
|
fpFCntl command: Test lock |
|
|
fpFCntl command: Set owner of file descriptor events |
|
|
Last bit in word. |
|
|
Power of 2 number of bits in word. |
|
|
Anonymous memory mapping (data private to application) |
|
|
FpMMap map type: Don't use a file |
|
|
FpMMap option: Ignored. |
|
|
FpMMap option: Ignored. |
|
|
Memory mapping failed error code |
|
|
FpMMap map type: Interpret addr exactly |
|
|
FpMMap option: Memory grows downward (like a stack) |
|
|
FpMMap option: lock the pages in memory. |
|
|
FpMMap option: Do not reserve swap pages for this memory. |
|
|
FpMMap map type: Changes are private |
|
|
FpMMap map type: Share changes |
|
|
FpMMap map type: Bitmask for type of mapping |
|
|
Maximum filename length. |
|
|
fpOpen file open mode: Append to file |
|
|
fpOpen file open mode: Create if file does not yet exist. |
|
|
fpOpen file open mode: Minimize caching effects |
|
|
fpOpen file open mode: File must be directory. |
|
|
fpOpen file open mode: Open exclusively |
|
|
fpOpen file open mode: Alias for O_NonBlock |
|
|
fpOpen file open mode: No TTY control. |
|
|
fpOpen file open mode: Fail if file is symbolic link. |
|
|
fpOpen file open mode: Open in non-blocking mode |
|
|
fpOpen file open mode: Read only |
|
|
fpOpen file open mode: Read/Write |
|
|
fpOpen file open mode: Write to disc at once |
|
|
fpOpen file open mode: Truncate file to length 0 |
|
|
fpOpen file open mode: Write only |
|
|
Maximum pathname length. |
|
|
Error condition on output file descriptor |
|
|
Hang up |
|
|
Data is available for reading |
|
|
Invalid request, file descriptor not open. |
|
|
Writing data will not block the write call |
|
|
Urgent data is available for reading. |
|
|
Priority data ready for reading. |
|
|
Same as POLLIN. |
|
|
Priority data my be written. |
|
|
Equivalent to POLLOUT. |
|
|
Easy access alias for unixtype.PRIO_PGRP |
|
|
Easy access alias for unixtype.PRIO_PROCESS |
|
|
Easy access alias for unixtype.PRIO_USER |
|
|
FpMMap memory access: page can be executed |
|
|
FpMMap memory access: page can not be accessed |
|
|
FpMMap memory access: page can be read |
|
|
FpMMap memory access: page can be written |
|
|
RLimit request address space limit |
|
|
RLimit request max core file size |
|
|
RLimit request CPU time in ms |
|
|
RLimit request max data size |
|
|
Rlimit request maximum file size |
|
|
RLimit request maximum file locks held |
|
|
RLimit request max locked-in-memory address space |
|
|
RLimit request max number of open files |
|
|
RLimit request max number of processes |
|
|
RLimit request max resident set size |
|
|
RLimit request max stack size |
|
|
fpAccess call test: read allowed |
|
|
Sigaction options: ? |
|
|
Sigaction options: Do not receive notification when child processes stop |
|
|
Sigaction options: ? |
|
|
Sigaction options: Do not mask signal in its own signal handler |
|
|
Sigaction options: Do not prevent the signal from being received when it is handled. |
|
|
Sigaction options: Restore the signal action to the default state. |
|
|
Call the signal handler on an alternate signal stack |
|
|
Sigaction options: Restore signal action to default state when signal handler exits. |
|
|
Sigaction options: Provide behaviour compatible with BSD signal semantics |
|
|
Signal restorer handler |
|
|
Sigaction options: The signal handler takes 3 arguments, not one. |
|
|
fpLSeek option: Set position relative to current position. |
|
|
fpLSeek option: Set position relative to end of file. |
|
|
fpLSeek option: Set absolute position. |
|
|
Signal: ABRT (Abort) |
|
|
Signal: ALRM (Alarm clock) |
|
|
Signal: BUS (bus error) |
|
|
Signal: CHLD (child status changed) |
|
|
Signal: CONT (Continue) |
|
|
Signal: FPE (Floating point error) |
|
|
Signal: HUP (Hangup) |
|
|
Signal: ILL (Illegal instruction) |
|
|
Signal: INT (Interrupt) |
|
|
Signal: IO (I/O operation possible) |
|
|
Signal: IOT (IOT trap) |
|
|
Signal: KILL (unblockable) |
|
|
Signal: PIPE (Broken pipe |
|
|
Signal: POLL (Pollable event) |
|
|
Signal: PROF (Profiling alarm) |
|
|
Signal: PWR (power failure restart) |
|
|
Signal: QUIT |
|
|
Signal: SEGV (Segmentation violation) |
|
|
Signal: STKFLT (Stack Fault) |
|
|
Signal: STOP (Stop, unblockable) |
|
|
Signal: TERM (Terminate) |
|
|
Signal: TRAP (Trace trap) |
|
|
Signal: TSTP (keyboard stop) |
|
|
Signal: TTIN (Terminal input, background) |
|
|
Signal: TTOU (Terminal output, background) |
|
|
Signal: Unused |
|
|
Signal: URG (Socket urgent condition) |
|
|
Signal: USR1 (User-defined signal 1) |
|
|
Signal: USR2 (User-defined signal 2) |
|
|
Signal: VTALRM (Virtual alarm clock) |
|
|
Signal: WINCH (Window/Terminal size change) |
|
|
Signal: XCPU (CPU limit exceeded) |
|
|
Signal: XFSZ (File size limit exceeded) |
|
|
Sigprocmask flags: Add signals to the set of blocked signals. |
|
|
Signal handler: Default signal handler |
|
|
Signal handler: error |
|
|
Signal handler: Ignore signal |
|
|
Maximum system signal number. |
|
|
Sigprocmask flags: Set of blocked signals is given. |
|
|
Sigprocmask flags: Remove signals from the set set of blocked signals. |
|
|
Signal information pad size. |
|
|
Max system name length. |
|
|
File (#rtl.baseunix.stat record) mode: Block device |
|
|
File (#rtl.baseunix.stat record) mode: Character device |
|
|
File (#rtl.baseunix.stat record) mode: Directory |
|
|
File (#rtl.baseunix.stat record) mode: FIFO |
|
|
File (#rtl.baseunix.stat record) mode: Link |
|
|
File (#rtl.baseunix.stat record) mode: File type bit mask |
|
|
File (#rtl.baseunix.stat record) mode: Regular file |
|
|
File (#rtl.baseunix.stat record) mode: Socket |
|
|
Mode flag: Read by group. |
|
|
Mode flag: Read by others. |
|
|
Mode flag: Read by owner. |
|
|
Mode flag: Read, write, execute by groups. |
|
|
Mode flag: Read, write, execute by others. |
|
|
Mode flag: Read, write, execute by user. |
|
|
Mode flag: Set Group ID on execution. |
|
|
Mode flag: Set user ID on execution. |
|
|
Mode flag: Set sticky bit. |
|
|
Mode flag: Write by group. |
|
|
Mode flag: Write by others. |
|
|
Mode flag: Write by owner. |
|
|
Mode flag: Execute by group. |
|
|
Mode flag: Execute by others. |
|
|
Mode flag: Execute by owner. |
|
|
Max length of utsname domain name. |
|
|
Max length of utsname system name, release, version, machine. |
|
|
Max length of utsname node name. |
|
|
#rtl.baseunix.fpWaitpid option: Do not wait for processes to terminate. |
|
|
Number of words in a TFDSet array |
|
|
Number of words in a signal set. |
|
|
#rtl.baseunix.fpWaitpid option: Also report children which were stopped but not yet reported |
|
|
fpAccess call test: write allowed |
|
|
fpAccess call test: execute allowed |