t_id
906
t_adddate
2003/10/03
Flag
t_interactive
set
t_result
0
t_knownrunerror
0
Record count: 50
Total = 50
OK=0 Percentage= 0.00
Skipped=50 Percentage= 100.00
Result type | Cat. | Count | Percentage | First date | Last Date |
Skipping test because it is interactive | 50 | 100.0 | 2024/09/26 18:42:00 90 | 2024/09/26 23:02:00 44 | |
i386 | 4 | 8.0 | 2024/09/26 19:54:00 70 | 2024/09/26 22:38:00 79 | |
powerpc | 14 | 28.0 | 2024/09/26 19:41:00 35 | 2024/09/26 23:02:00 44 | |
powerpc64 | 17 | 34.0 | 2024/09/26 18:42:00 90 | 2024/09/26 22:29:00 103 | |
wasm32 | 7 | 14.0 | 2024/09/26 19:31:00 339 | 2024/09/26 22:50:00 299 | |
riscv64 | 8 | 16.0 | 2024/09/26 19:14:00 123 | 2024/09/26 19:59:00 123 | |
linux | 39 | 78.0 | 2024/09/26 18:42:00 90 | 2024/09/26 23:02:00 44 | |
go32v2 | 4 | 8.0 | 2024/09/26 19:54:00 70 | 2024/09/26 22:38:00 79 | |
wasi | 7 | 14.0 | 2024/09/26 19:31:00 339 | 2024/09/26 22:50:00 299 | |
3.3.1 | 34 | 68.0 | 2024/09/26 18:42:00 90 | 2024/09/26 22:50:00 299 | |
3.2.3 | 16 | 32.0 | 2024/09/26 21:17:00 71 | 2024/09/26 23:02:00 44 |
{ %interactive } { 1) move cursor in ' writeln(2); ' and press ctrl+F8: red line 2) press ctrl+F9 now the cursor is under 'w' of winreln(2); 3) press Enter here 4) press ctrl+F9 5) move cursor under ';' of 'writeln(1);' and press Canc now red line is absent 6) press ctrl+F9 there is a breackpoint in 'writeln(2)' , but line isn't red :-( --- then, close the IDE and re-run it, the red line is now present Category: IDE(Text) Type: Error Date entered: 2002-09-25 Submitter:Salvatore Licciardi } begin // ide DOS/Win 0.9.2 at 2002/08/25 writeln(1); writeln(2); writeln(3); writeln(4); writeln(5); writeln(6); writeln(7); end.